16
Cooling EfficiencyUp to 16 SEER
Energy SavingsAn Average of 19%
Multi-Split Heating and Cooling Floor/Ceiling Unit

4MXX8

4MXX8 Description

The 4MXX8 indoor multi-split heating and cooling unit works as part of a ductless multi-split system. This ductless product can be mounted near the floor or ceiling and offers high-efficiency heating and cooling for precise comfort with no ductwork.

Overview

-

Ductless System

Composed of three main components—an indoor unit consisting of a coil and a fan, an outdoor compressor unit and a remote control—most ductless multi-split heating and cooling systems are connected by refrigerant lines and require no ductwork. The indoor multi-split heating and cooling unit can be mounted on the wall or in the ceiling.

Efficient Comfort

Trane’s ductless multi-split heating and cooling units have Seasonal Energy Efficiency Ratings (SEER) ranging from 16.00 to 22.00, making the systems remarkably efficient and environmentally friendly.

Quiet Operation

Specially designed air vents efficiently reduce sound to provide quiet comfort as low as 29 dB, for whisper-quiet operation.

Design Flexibility

Since there is no ductwork to install, it’s easy to add Trane’s reliable heating and cooling to any home, in any room desired. It’s an economical and efficient option for homes without an existing ducted system or when adding ductwork may be impractical or too expensive.

Specifications

-

4MXX8 Floor/Ceiling Multi-Split Heating and Cooling Unit

modelcooling btuhheating btuhseer
4MXX8509A10N0AA8,5009,50016
4MXX8512A10N0AA11,90013,10016
4MXX8518A10N0AA17,00018,70016
4MXX8524A10N0AA22,80027,40016

Every Trane ductless multi-split heating and cooling system consists of an indoor and an outdoor unit. Trane indoor units feature:

Specially designed air vent efficiently reduces operation noise to provide quiet comfort, as low as 29 dB.

Flexible installation options to meet different requirements. (Floor/ceiling units only).

The compact construction and simple structure make this ductless multi-split heating and cooling system easy to install and maintain.

To reduce moisture on the filter and provide fresh, healthy air into the room, clean the filter regularly with water.

Air is pre-heated during heating operation to prevent blowing cold air directly to the room.

You set the time for the unit to operate automatically when you want.

Each indoor multi-split heating and cooling unit is controlled with a wireless remote control (purchased separately) so you can easily control your system from anywhere in the room. The "I feel" function enables the system to sense temperature at the remote control, rather than a thermostat.

These floor/ceiling indoor units ship with a wired controller displaying temperature, operational mode, and time settings.

Trane Product

Trane Warranty

Trane HVAC Product

Protect your 4MXX8 with one of our top of the line warranties

View Warranty
Estimated energy savings of19%Savings based on the rating of a matched system
Energy Savings

Save an estimated 19% in energy costs with this unit.

System efficiency is measured in SEER, (Seasonal Energy Efficiency Ratio) and HSPF (Heating Seasonal Performance Factor). The higher the SEER and HSPF, the greater the system’s energy efficiency, and the lower the overall carbon footprint of your household.